China factory 6806 2RS Thin Wall Shielded 30*42*7 mm ABEC3 Deep Groove Ball Bearing wholesaler

Product Description

Product Description

6800 series deep groove ball bearings
product-list-1.html

 

Bearing NO (mm)Boundary Dimensions (Kn) (Kn) (r/min)
Limit Rotational Speed
(Kg)
Weight
d D B Dynamic Load Rating
Cr
Static Load Rating
Cor
Grease Lubrication Oil Lubrication
6800 10 19 5 1.72 0.84 34000 40000 0.0053
6801 12 21 5 1.92 1.04 32000 38000 0.0068
6802 15 24 5 2.07 1.26 28000 34000 0.0075
6803 17 26 5 2.63 1.57 26000 30000 0.0083
6804 20 32 7 4.0 2.47 22000 26000 0.02
6805 25 37 7 4.5 3.15 18000 22000 0.571
6806 30 42 7 4.7 3.65 15000 18000 0.026
6807 35 47 7 4.9 4.1 14000 16000 0.571
6808 40 52 7 6.35 5.5 12000 14000 0.033
6809 45 58 7 6.6 6.15 11000 13000 0.041
6810 50 65 7 6.4 6.2 9500 11000 0.054
6811 55 72 9 8.8 8.5 8500 10000 0.081
6812 60 78 10 11.5 10.9 8000 9500 0.101
6813 65 85 10 11.9 12.1 7500 8500 0.12
6814 70 90 10 12.1 12.7 6700 8000 0.13
6815 75 95 10 12.5 13.9 6300 7500 0.14
6816 80 100 13 12.7 14.5 6000 7100 0.15
6817 85 110 13 18.7 20 5600 6700 0.27
6818 90 115 13 19.0 21 5300 6300 0.28
6819 95 120 13 19.3 22 5000 6000 0.29
6820 100 125 13 19.6 23 4800 5600 0.31
Note:Above-mentioned products include its modification series,such as Z,2Z,RS,and 2RS etc.

 

Detailed Photos

 


Black chamfer with rubber seal

Black chamfer with white dust cover

open UG

white chamfer with yellow dust cover

ceramic ball bearing

THE USE OF THE BEARING
Some tips on use
Rolling bearing is a precise part. Therefore it should be used carefully. No matter how high performance the bearing has, it can be obtained by improper use, the followings are the points for attention to use bearings.
(1) Keep clean the bearing and its surrounding areas
It is harmful to the bearing even by tiny dust which can not be seen by human eyes. Therefore it should always keep clean the surrounding environments in order to prevent the bearing from dust corrosion.
(2) Use bearing carefully
Scar and indentation can essily be produced out of strong impact to the bearing in use and become the cause of accidents. Therefore special caution should be given to its use.
(3) Use the appropriate operating tool
Avoid using a hammer or heavy direct tap on a bearing or sleeve, must use appropriate tools such as press or heating.
(4) Be careful to the rust corrosion of the bearings
The sweat in the hands will cause rust in operating the bearings. Therefore your hands should be cleanly washed and dried before operation. You’d better wear gloves in doing the work. 
(5) Handler should familiar with bearing
(6) Establish bearing handling criteri
·Bearing storage
.Bearing and surrounding cleaning
.Dimension of mounting parts and inspection
.Machining quality
.Mounting handing
.After mounting inspection
·Disassembly handing
·Keep maintain
·Adding lubricant

 

Installation Instructions

 Bearing mounting
 Precautions for proper mounting of bearing
1) Bearing preparation
Bearing should not be unpacked until before mounting due to spray anti-corrosion oil and pack anti-corrosion paper. In addition, spray anti-corrosion oil on bearing have good lubricate function. For general purpose, just directly using bearing fill-in grease bearings, without cleaning. However, bearing for instrument or high speed rotating must be cleaned with clean filtered oil in order to remove the anti-corrosion oil. At that time, the bearings are easy to corrosion could not storage long term.
2) Inspection of shafts and housings
Cleaning shaft and housing, confirming no scratched or machine burrs, no CZPT and cutting piece in housing. Secondly comppare with drawing, the shaft and housing of dimension, form and machining quality should be inspected.
chart 1 Measure location for shaft diameter                                                                         chart 2  Measure location for housing bore diameter                       

As chart 1 and chart 2 showing, divided several locations to be measure on shaft and housing bore diameters, It should be careful inspected perpendicular between shaft, housing fillet dimension and shoulder.
Before mounting bearing, it should be sprayed mechanical oil on fitting surface after check out the shaft and housing.

Bearing storage
Before leaving the factory, the bearing is sprayed proper rust-inhibiting oil and packed rust-inhibiting paper. The quality of bearing is guaranteed, if the packing is not broken.
For long-term storage, if the humidity less than 65% and the temperature about 20, it should storage on shelf which is higher 30cm than ground.
In addition, storage occasion should avoid sunshine and contact with cold wall.

Pictures about packaging

 

Company Profile

Our Advantages

1. World-Class Bearing: We provide our customers with all types of indigenous bearing with world-class quality.
2. OEM or Non-Stand Bearings: Any requirement for Nonstandard bearings is Easily Fulfilled by us due to its vast knowledge and links in the industry.
3. Genuine products With Excellent Quality: The company has always proved the 100% quality products it provides with genuine intent.
4. After Sales Service and Technical Assistance: The company provides after-sales service and technical assistance as per the customer’s requirements and needs.
5. Quick Delivery: The company provides just-in-time delivery with its streamlined supply chain. 
SAMPLES
1. Samples quantity: 1-10 PCS are available. 
2. Free samples: It depends on the Model No., material and quantity. Some of the bearings samples need client to
    pay samples charge and shipping cost. 
3. It’s better to start your order with Trade Assurance to get full protection for your samples order. 

CUSTOMIZED
The customized LOGO or drawing is acceptable for us. 

MOQ
1. MOQ: 10 PCS standard bearings. 
2. MOQ: 1000 PCS customized your brand bearings. 

OEM POLICY
1. We can printing your brand (logo, artwork)on the shield or laser engraving your brand on the shield. 
2. We can custom your packaging according to your design
3. All copyright own by clients and we promised don’t disclose any info.

 

/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Motor Parts: Motor Bearing
Water Pump Parts: Water Pump Bearing
Air Compressor Parts: Air Compressor Bearing
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|

Order Sample

black or white or as required
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

shielded bearing

How to properly lubricate a shielded bearing?

Proper lubrication is crucial for the optimal performance and longevity of shielded bearings. Here’s a detailed explanation of how to properly lubricate a shielded bearing:

1. Select the appropriate lubricant: Choose a lubricant that is specifically recommended by the bearing manufacturer for the intended application and operating conditions. Consider factors such as temperature range, speed, load, and environmental conditions when selecting the lubricant. Common types of lubricants used for shielded bearings include grease and oil.

2. Determine the lubrication interval: The frequency of lubrication depends on the operating conditions and the manufacturer’s recommendations. In some cases, bearings come pre-lubricated and may not require immediate lubrication. However, it’s important to establish a lubrication schedule based on factors such as operating hours, speed, and load to ensure consistent lubrication throughout the bearing’s lifespan.

3. Clean the bearing and surrounding area: Before lubrication, ensure that the bearing and its surrounding area are clean and free from dirt, dust, and contaminants. Use appropriate cleaning methods and tools to remove any debris that could potentially contaminate the lubricant and affect the bearing’s performance.

4. Choose the lubrication method: There are several methods to lubricate shielded bearings, including manual lubrication and automated lubrication systems:

  1. Manual lubrication: For manual lubrication, carefully apply the lubricant to the bearing while ensuring even distribution. Use the manufacturer’s recommended quantity of lubricant and avoid over-lubrication, as it can lead to excess heat generation, increased friction, and premature bearing failure. Pay attention to evenly coat the rolling elements and races with the lubricant.
  2. Automated lubrication systems: In applications with high-speed or hard-to-reach bearings, automated lubrication systems can provide more precise and consistent lubrication. These systems can be programmed to deliver the appropriate amount of lubricant at regular intervals, ensuring optimal lubrication without the need for manual intervention.

5. Monitor and inspect: Regularly monitor the condition of the lubricant and the bearing’s performance. Check for any signs of contamination, degradation, or inadequate lubrication. Implement a routine inspection schedule to detect any potential issues early and take corrective actions as necessary. If the lubricant appears dirty or contaminated, or if the bearing shows signs of abnormal wear or increased friction, it may be necessary to clean and re-lubricate the bearing.

6. Follow manufacturer guidelines: Always refer to the manufacturer’s recommendations and guidelines for lubrication procedures, lubricant types, quantities, and maintenance intervals specific to the shielded bearing model and application. Manufacturers often provide detailed instructions and specifications to ensure proper lubrication and maximize the bearing’s performance and lifespan.

By following these steps and adhering to the manufacturer’s guidelines, you can ensure that the shielded bearings are properly lubricated, promoting smooth operation, reducing friction and wear, and prolonging the bearing’s service life.

shielded bearing

How to choose the right shielded bearing for my equipment?

Choosing the right shielded bearing for your equipment is crucial to ensure optimal performance, longevity, and reliability. Here’s a detailed explanation of the steps involved in selecting the right shielded bearing:

  1. Identify the application requirements: Start by understanding the specific requirements of your equipment and its operating conditions. Consider factors such as load (both radial and axial), speed, temperature, vibration, and environmental conditions. Determine the desired bearing life, maintenance intervals, and any special considerations unique to your application.
  2. Understand the bearing characteristics: Familiarize yourself with the different types of shielded bearings available and their respective characteristics. Consider factors such as the type of rolling elements (ball or roller), bearing material, lubrication requirements, and sealing options. Each characteristic affects the bearing’s performance in terms of load capacity, speed capability, temperature resistance, and durability.
  3. Consult bearing manufacturer catalogs and specifications: Refer to the catalogs, technical datasheets, and specifications provided by reputable bearing manufacturers. These resources contain detailed information about the available shielded bearings, including their dimensions, load ratings, speed limits, and other relevant data. Identify bearings that meet your application requirements based on the manufacturer’s recommendations.
  4. Consider bearing material and construction: Evaluate the suitability of different bearing materials for your application. Common options include steel, stainless steel, ceramics, and plastic. Consider factors such as corrosion resistance, temperature resistance, load capacity, and the specific conditions in which the equipment operates. Additionally, evaluate the bearing’s construction, such as the number of shields, cage design, and any special features that enhance performance or reliability.
  5. Calculate the bearing load: Determine the expected load on the bearing, considering both the radial and axial components. Calculate the equivalent dynamic load and static load based on the operating conditions, and compare them against the bearing’s load ratings provided by the manufacturer. Ensure that the selected bearing can handle the anticipated load without premature failure or excessive wear.
  6. Consider lubrication and sealing: Evaluate the lubrication requirements of the shielded bearing. Determine whether the bearing requires grease or oil lubrication and consider factors such as operating speed, temperature, and contamination levels. Additionally, assess the sealing options available for shielded bearings. Seals can help protect the bearing from contaminants and retain lubrication, enhancing its performance and service life.
  7. Seek expert advice: If you’re uncertain about the selection process or have specific application challenges, consider reaching out to bearing manufacturers or their authorized distributors. Their technical experts can provide valuable guidance and recommend the most suitable shielded bearing for your equipment based on their expertise and experience.

By following these steps and considering the relevant factors, you can choose the right shielded bearing that matches your equipment’s requirements. Remember to ensure compatibility with the shaft and housing, and follow proper installation and maintenance practices to maximize the bearing’s performance and longevity.

shielded bearing

How to maintain and clean shielded bearings?

Proper maintenance and cleaning are crucial for ensuring the optimal performance and longevity of shielded bearings. Here’s a detailed explanation of how to maintain and clean shielded bearings:

  1. Regular Inspection: Periodically inspect the shielded bearings for any signs of damage, wear, or contamination. Check the shields for dents, deformations, or loosening. Inspect the rolling elements and raceways for signs of pitting, scoring, or abnormal wear. If any issues are found, replace the bearing or take appropriate corrective actions.
  2. Clean Work Environment: Before performing any maintenance on shielded bearings, ensure that the work area is clean and free from dust, dirt, and other contaminants. This helps minimize the risk of introducing particles into the bearing during maintenance.
  3. Use Proper Tools: When handling shielded bearings, use appropriate tools and equipment to avoid damaging the shields or internal components. Avoid using tools with sharp edges that can scratch or deform the shields.
  4. Cleaning Procedure: To clean shielded bearings, follow these steps:
    1. Remove the shields: Carefully remove the shields from the bearing using suitable tools. Be gentle to avoid damaging the shields or bending them out of shape.
    2. Clean the shields: Clean the removed shields using a mild solvent or degreaser. Gently wipe away any dirt or debris using a soft, lint-free cloth. Avoid immersing the shields in solvents for an extended period as it can damage the shields.
    3. Clean the internal components: If necessary, clean the internal components of the bearing using a suitable solvent or degreaser. Use a soft, lint-free cloth or a soft-bristle brush to remove any dirt or old lubricant. Ensure that the solvent used is compatible with the bearing material.
    4. Dry the components: Allow the cleaned shields and internal components to air dry completely or use a low-pressure air source to remove any residual solvent or moisture.
    5. Lubricate the bearing: Apply an appropriate lubricant to the cleaned internal components. Follow the manufacturer’s recommendations for the type and amount of lubricant to be used.
    6. Reinstall the shields: Carefully reinstall the cleaned shields onto the bearing, ensuring they are properly aligned and securely seated.
  5. Relubrication: Depending on the operating conditions and manufacturer’s recommendations, shielded bearings may require periodic relubrication. Monitor the lubricant condition and replenish it as needed. Follow the manufacturer’s guidelines for the relubrication interval and the type of lubricant to be used.
  6. Document Maintenance: Keep a record of the maintenance activities performed on the shielded bearings, including the date, cleaning procedure, lubrication details, and any observations or issues. This documentation can help track the maintenance history and plan future maintenance activities.

It’s important to note that the maintenance requirements may vary depending on the specific application, bearing type, and operating conditions. Always refer to the manufacturer’s instructions and guidelines for the proper maintenance and cleaning procedures of the shielded bearings.

By following these maintenance and cleaning practices, you can ensure the optimal performance and longevity of shielded bearings, minimizing the risk of premature wear, contamination, or failure.

China factory 6806 2RS Thin Wall Shielded 30*42*7 mm ABEC3 Deep Groove Ball Bearing   wholesalerChina factory 6806 2RS Thin Wall Shielded 30*42*7 mm ABEC3 Deep Groove Ball Bearing   wholesaler
editor by CX 2024-01-23

Recent Posts